We store data about your usage in cookies. By continuing to browse the site, you are agreeing to this

Cookie policy

Pre-amplifier price comparison

86 products
Sort by rank

1

Related store offers

Gristleizer Pre-Amplifier TG5

Gristleizer Pre-Amplifier TG5

Interface module with additional functionsFuture Sound Systems Gristleizer Pre-Amplifier TG5 is an interface module with additional functions for modular synthesizers in Eurorack format. The Gristleizer modules are based on an old effect device of industrial pioneers Throbbing Gristle. The TG5 pre-amplifier allows any type of external audio source to be integrated into a Eurorack system. The line input is first passed through an FET stage of the preamplifier and then into a THAT VCA whose direct output is available on the clean output. This source is then fed to the master output through two additional FET amplification stages and a tone range (which includes bass, mid and treble controls). Bit and boost controls allow further control over the sound of the input signal. By accessing the module's gain control input, the envelope outputs can be used as control sources for the preamplifier, converting the module into a dynamic compressor (inverted envelope) or expander (normal envelope).Future Sound Systems Gristleizer Pre-Amplifier TG5 at a glance:Interface module with additional functionsIntegration of any external audio sourcesTone report includes bass, mid and treble controlsBite and boost controls for maximum sound controlCan also be used as a dynamic compressor and expanderFuture Sound Systems Gristleizer DemoFuture Sound Systems Gristleizer Demo IIChris Carter performing on the Future Sound Systems Gristleizer Modules

£263

Free shipping

Music store
Full Details Proel AMIX63 PA Mixer Pre-Amplifier

Full Details Proel AMIX63 PA Mixer Pre-Amplifier

£199

Delivery unknown

HW Audio
E-Audio Stereo Phono Pre-Amplifier, A097M

E-Audio Stereo Phono Pre-Amplifier, A097M

This Stereo Phono Pre-Amplifier from E-Audio allows a turntable to be connected to a Hi-Fi system which does not have a phono input. The unit has both Phono and Aux inputs which can be independently switched to the line level output. Stereo Phono Pre-Amplifier Maximum Permissible Input: 38mV. Output Level: 1.8V RMS Signal to Noise Ratio: 50dB with normal input Stereo Phono Pre-Amplifier Allows turntable to connect to a Hi-Fi Phono and Aux inputs

£12.95
£15.94incl. shipping
Inta Audio
Pre-Amplifier for Turntables - RCA/Phono Stereo Preamp

Pre-Amplifier for Turntables - RCA/Phono Stereo Preamp

Our turntable pre-amplifier from AV Link is designed for connecting turntables to your HiFi, mixer or interface setup. Featuring RCA/Phono stereo inputs, with RCA/Phono stereo outputs allowing you to connect your turntable to other systems whilst eliminating ground loop hum. Housed in a robust chassis ensuring a long-lasting, durable lifespan. Mains adaptor included. Features: Stereo pre-amplifier for use with turntables fitted with magnetic cartridges Amplifies the signal to match it to the line or CD input of an amplifier On/Off switch fitted Mains adaptor included Ideal for connecting turntables to your hi-fi, mixer or interface Robust metal case and includes power supply Stereo RCA inputs, with RCA stereo outputs Helps reduce unwanted noise and hum

£12.95
£15.94incl. shipping
Inta Audio
FetHead Phantom

FetHead Phantom

The Tritonaudio FetHead Filter is a mobile microphone pre-amplifier for ribbon and dynamic microphones. The TritonAudio FetHead Phantom is an in-line pre-amp for condensermics. The FetHead is a low-noise, high quality, in-line microphone preamplifier that provides improved sound for Ribbon and Dynamic microphones. The electronics are housed in a robust metal chassis with a balanced 3-pole female XLR input and a balanced 3-pole male XLR output, rugged for use at home, in the studio or on tour. This is a version of the FetHead for Condenser microphones. The FetHead Phantom allows phantom power to reach the microphone.The main features of the TritonAudio FetHead Phantom include: Ultra-Low Noise Class-A JFet Amplifier 27dB Amplification (@ 3 kOhm Load) Double Single Ended Amplifier Topology 4x Matched jFets Shielded Enclosure Z-in 22k 24-48V Phantom Power

£67
£71.99incl. shipping
Music store
FetHead

FetHead

The Tritonaudio FetHead is a mobile microphone pre-amplifier for dynamic or ribbon microphones. The TritonAudio FetHead is an in-line pre-amp for dynamic mics. The FetHead is a low-noise, high quality, in-line microphone preamplifier that provides improved sound for Ribbon and Dynamic microphones. The electronics are housed in a robust metal chassis with a balanced 3-pole female XLR input and a balanced 3-pole male XLR output, rugged for use at home, in the studio or on tour.This is a regular version of the FetHead for Ribbon and Dynamic microphones. The FetHead has a high quality, low noise signal amplification that also extends the usable range of a ribbon microphone, making it more suitable for recording softer passages. Its circuit uses phantom power but shields it from its input (and the microphone's output). As a result it offers effective protection to the microphone.The main features of the TritonAudio FetHead include: Ultra-Low Noise Class-A JFet Amplifier 27dB Amplification (@ 3 kOhm Load) Double Single Ended Amplifier Topology 4x Matched jFets Shielded Enclosure Z-in 22k 24-48V Phantom Power

£58
£62.99incl. shipping
Music store
Tannoy TM1 Condenser Microphone & Microphone Stand

Tannoy TM1 Condenser Microphone & Microphone Stand

Tannoy TM1 Condenser Microphone & Microphone Stand This kit includes the Tannoy TM1 Condenser microphone and boom microphone stand, a perfect combination for recording a whole host of instruments from vocals, guitars, drums and more! Tannoy TM1 The TM1 bundle from Tannoy offers you everything that you need to create high-quality recordings in one affordable kit! The TM1 condenser microphone itself is large-diaphragm, making it highly versatile and perfect for use in a range of settings from home studios and recording studios to broadcast stations. It features a 1” gold-plated diaphragm with internal shock-mounting to reduce the effect of vibrations around the microphone for a clear, precise recording. A fixed cardioid polar pick-up pattern makes it especially suited to vocals and spoken word recording, though it’s equally at home with instrumental recording too. An Ultra Low Noise design with super-quiet pre-amps and a transformerless output stage all work to eliminate electrical signal noise and artefacts that can negatively impact your recordings on lesser microphones. It supports +48V phantom power for a wide dynamic range. Included along with the microphone are a dedicated shockmount with integrated pop shield to greatly reduce the effect of environmental vibrations and plosive vocal noise in your recordings, as well as a 20” (6m) XLR cable and a dust cover for protecting your microphone when not in use. Key Features: - TM1 mic, shockmount with integrated pop shield, 20" (6m) XLR cable and dust cover - Premium large condenser microphone capsule with 1" gold plated diaphragm - Internal shock mounting for microphone capsule - Fixed cardioid polar pick up pattern - Ultra Low Noise Design - Extremely quiet pre-amplifier design with transformer less output stage - 148 V phantom powering for wide dynamic range Boom Microphone Stand Pro Microphone Stand with Boom, Supplied with cable clips and 3/8" to 5/8" adaptor -The microphone stand is a metal construction with a...

£99

Free shipping

Inta Audio
Log in

Sign up for free