We store data about your usage in cookies. By continuing to browse the site, you are agreeing to this

Cookie policy

Equalizer price comparison

53 products
Sort by rank

1

Related store offers

EQ 351 Single 31 Band Equalizer

EQ 351 Single 31 Band Equalizer

The EQ351 31-Band Graphic Equaliser by ART features constant Q circuitry with a 3% centre frequency accuracy, 20mm centre detent sliders, selectable boost/cut range of 6dB or 12dB, active balanced and unbalanced input and output connect-ions, adjustable high pass filter, adjustable low pass filter, variable input level control, clip level indicators, ground lift switch, internal power supply and selectable line voltage switch. A range control switch is provided which allows you to set the maximum boost or cut for each band of equalization to either 6dB or 12dB. The high pass filter rolls off lower frequencies which is useful for decreasing rumble or low frequency hum from a signal. Its range is adjustable from 10Hz to 250Hz. Frequencies below these settings are rolled off, while frequencies above are unaffected. The low pass filter rolls off higher frequencies which is useful for reducing hiss or sibilance from a signal. Its range is adjustable from 3kHz to 40kHz. The rugged, all-steel constructed chassis occupies 1U rack space and is intended for installation in standard 19" equipment racks.Multiple input and output configurations are provided for ease of use and incorporate paralleled connections. The XLR and 1/4" TRS connectors use active balanced, low noise circuitry. XLR connections are: Pin 1 = ground, Pin 2 = Hot (+), and Pin 3 = Cold (-). The 1/4" TRS connections are: Tip = Hot (+), Ring = Cold (-), and Sleeve = ground. Both the XLR and 1/4" connectors may be used in an unbalanced configuration. The RCA jacks are unbalanced. The 351 is designed to work with a variety of signal levels. The input level control covers a wide range and can easily accommodate -10 and +4 signal levels. A clip LED will light when a signal level of 5dB before clipping occurs.The 351 may be used in a variety of applications such as live sound, recording studios, instrument racks as well as any conventional fixed installation environment. Use the 351 equalizer wherever precise modi...

£133

Free shipping

Music store
EQ-73 Neve-Style Equalizer

EQ-73 Neve-Style Equalizer

The class-A circuit used in the EQ-73 is similar to the eq section in the classical 1073 module, without the high pass filter. Additional frequencies have been added and the mid frequency band uses two inductors, the higher value of the second one is used for the two lowest frequencies, 160 Hz and 240 Hz, to achieve a suitable response.The sound character is warm, punchy, sweet and musical. These classic characteristics have been heard on countless recordings through the years and it is a versatile sound that works very well on most sound sources and in most genres. The essence of this sound is now available at a surprisingly low cost, making it available to nearly everyone.Features: Vintage Style electronics No intergrated circuits in the signal path 3-band with a dual inductor based mid frequency band Stepped frequency selection A wide selection of frequencies from 20 Hz to 24 kHz Control range up to +/- 18 dB Separate Bypass switches for each band Tantalum capacitors in the signal path Made to be used together with one of our PRE-73 models with an Insert jack or any other unit with a low level Insert jack TRS jack for in-and output connection, the nominal working level is around 18 dBu Selectable ground lift switch External power supply to avoid interaction with the audio circuits Great sound that suits most sound sources and genres A solid build quality that will last many years of normal use!!!! 3 years Music Store warranty !!!!!!!! 30 days Money-Back guarantee !!!!

£255

Free shipping

Music store
xfilter Equalizer 19"

xfilter Equalizer 19"

The Elysia Xfilter Equalizer 19" is the compact version of the Elysia EQ museq, which makes it the mini-museq so to speak. The xfilter is extremely flexible and offers high and low shelf bands, which can be switched to high and low pass filters with resonance. Additionally, two bell filters with wide and narrow EQ for mids, plus passive Lowcut steps which ensure for brilliance in the high frequencies. The sound of the xfilter is very open.The main features of the Elysia Xfilter Equalizer 19" include: 100% Class-A Genuine Stereo-Link One control set for two channels Resonance capable high and low pass filter Additional passive high-band Switchable filter quality Low tolerance components (computer selected for better stereoscopic image) Stepped potentiometers Made in Germany

£1,326

Free shipping

Music store
Golden Age Project EQ-573 Equalizer - 500 Series

Golden Age Project EQ-573 Equalizer - 500 Series

The perfect complement to the PRE-573 MKII The class-A circuit used in the EQ-573 is similar to the eq section in the classical 1073 module. Additional frequencies have been added to the mid and high frequency sections. The signal path uses only discrete components like resistors, capacitors, inductors and transistors. The sound character is warm, punchy, sweet and musical. These classic characteristics have been heard on countless recordings through the years and it is a versatile sound that works very well on most sound sources and in most genres. The EQ-573 has stepped frequency controls that offers a wide selection of frequencies from 33 Hz to 20 kHz. Each section can be switched off individually. There is also a master bypass switch for easy comparisons. The low and high frequency bands are shelving and the mid frequency band is of the bell type. The control range is +/-15 dB for the two lower bands and +/- 18dB for the high frequency band. The high pass filter is of the inductor type with a slope of 18 dB / octave. The EQ-573 cannot be used as a standalone EQ. It is designed to be used together with the Golden Age Project PRE-573 that has an insert connector. Combining the PRE-573 and the EQ-573 in a 500 Series rack, one will get a 1073-style unit at a low cost and with a great sound! Features 3-band with a dual inductor based mid frequency band Inductor based high pass filter Stepped frequency selection Control range up to +/- 18 dB A wide selection of frequencies from 33 Hz to 20 kHz Each section has can be switched off individually Master Bypass switch Tantalum capacitors in the signal path Circuit board star grounding scheme Great sound that suits most sound sources and genres A solid build quality that will last many years of normal use Designed to be used together with the Golden Age Project PRE-573

£210

Delivery unknown

Andertons Music
Golden Age Project EQ73 Equalizer - Half Rack

Golden Age Project EQ73 Equalizer - Half Rack

The class-A circuit used in the EQ-73 is similar to the eq section in the classical 1073 module, without the high pass filter. Additional frequencies have been added and the mid frequency band uses two inductors, the higher value of the second one is used for the two lowest frequencies, 160 Hz and 240 Hz, to achieve a suitable response. The sound character is warm, punchy, sweet and musical. These classic characteristics have been heard on countless recordings through the years and it is a versatile sound that works very well on most sound sources and in most genres. The essence of this sound is now available at a surprisingly low cost, making it available to nearly everyone. The EQ-73 has stepped frequency controls that offers a wide selection of frequencies from 20 Hz to 24 kHz. The Low and High frequency bands are shelving and the mid frequency band is of the bell type. The control range is +/-15 dB for the two lower bands and +/- 18dB for the high frequency band. There are separate bypass switches for all three bands. The EQ-73 is made to be used together with one of our PRE-73 models that has an Insert jack. It can also be used with many other units that has a low level insert jack. Combining a PRE-73 and an EQ-73, and using a UNITE rack kit to mount them together, one will get a 19-inch 1073-style unit at a low cost and with a great sound! Vintage Style electronics. No intergrated circuits in the signal path 3-band with a dual inductor based mid frequency band Stepped frequency selection A wide selection of frequencies from 20 Hz to 24 kHz Control range up to +/- 18 dB Separate Bypass switches for each band Tantalum capacitors in the signal path Made to be used together with one of our PRE-73 models with an Insert jack or any other unit with a low level Insert jack TRS jack for in-and output connection, the nominal working level is around 18 dBu Selectable ground lift switch External power supply to avoid interaction with the audio circuits Great sound that...

£225

Delivery unknown

Andertons Music
Dual Channel 15-Band Equalizer

Dual Channel 15-Band Equalizer

The secret to making speakers sound great lies with the crossover you use. With the dbx® 234xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world's finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs.

£126.63

Delivery unknown

DFB Sound & Light Warehouse
Log in

Sign up for free